Ask Experts Questions for FREE Help !
Ask
    foutsbug's Avatar
    foutsbug Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 24, 2012, 12:44 PM
    No Heating, York Furnace
    York Furnace, M/N LY8S080A2UH11A, combustion blower turns on, no ignition of flame. 4 red flashes on control board.
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #2

    Jan 24, 2012, 02:57 PM
    Hi foutsbug, Four red flashes indicate that a 24-volt fuse or the high-limit switch is open. Possible causes include an improperly sized ducting system, a dirty air filter, a faulty blower motor, an open fuse on the control board or restricted circulating airflow. Good luck and let us know how it goes.
    foutsbug's Avatar
    foutsbug Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Jan 24, 2012, 03:13 PM
    I checked fuse (good), Changed filter (dirty w/ pet hair- but I've seen worse), pushed resets on all limit switches switchs (none open). Unit did light again, though! Access panels were tweeked out. Thanks for the response though. Will keep you posted
    SeattlePioneer's Avatar
    SeattlePioneer Posts: 97, Reputation: 9
    Junior Member
    		  
    #4

    Jan 24, 2012, 03:42 PM
    Look for a sticker on the furnace, especially on the inner side of the fan compartment cover that discloses what the diagnostic codes mean.

    The symptoms sound more like a pressure switch that isn't making, and a double check might be worth while.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

York heating troubleshooting? [ 0 Answers ]

My york 90 will not stay on without automatically pushing the indicator button which blinks once indicating a lockout to the unit

York 80% eff Heating furnace [ 1 Answers ]

I had a new YORK 80% furnace installed in Sep'10. Room Temp never reaches required or set temperature- goes up 2 degree and stops. Furnace Flashes red 6 times - "Pressure switch cycle lockout". I have to turn the Thermostat off and on again to restart. Otherwise, it waits for 1/2hr and so and...

York Stellar Furnace Heating up Furnace Room to 110 Degress? [ 2 Answers ]

I have a York Stellar Furnace in my newly purchased house. Furnace is 15 years old. Furnace is releasing hot air from front grills and heats up furnace room to 110 Degrees. I had a Bryant Furnace in another house and this never happened. All plenams and ducts are taped and sealed so the heat is...

York Heating oil furnace with pump /rth7400 [ 13 Answers ]

hello I'm glad there is a place to ask question and getting good answers I installed a rth7400 honeywell thermostat on my york furnace honeywell burner and I can't get heat out of it W \ white wire B \ clear wire Y \ yellow wire

York Furnace stops heating during the day? [ 3 Answers ]

Here is my story I have a York furnace and a Honeywell thermostat. I've run into a situation where either I don't know how to use a thermostat( its electronic) or something is wrong with my furnace. Previously, I would set my temperature on the thermostat and keep it on Auto. From there, the...

View more questions Search