Ask Experts Questions for FREE Help !
Ask
    alfiedub66's Avatar
    alfiedub66 Posts: 2, Reputation: 1
    New Member
     
    #1

    Jan 23, 2012, 04:03 AM
    Water stops in hot taps pumped shower,immersion fed by oil fired heating.
    I fixed a rat eaten pipe had to do the usual stuff to get rid of airlocks,3bathrooms,2off this problem immersion/pump.I have used a wet vac got water out of pipes,I have opened up joints got air out of these also,but still after a minute of pumping water trickles off stops!I have done a lot of plumbing as I say,I have tried a lot of Tricks.now I'm Stumped!thanks to anyone for tips,Paul
    alfiedub66's Avatar
    alfiedub66 Posts: 2, Reputation: 1
    New Member
     
    #2

    Feb 1, 2012, 04:32 AM
    I bled the flow pipe into the immersion and it blew out the airlock

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What Is The Correct Procedure To Bleed Air From A Oil Fired Hot Water Heating System [ 0 Answers ]

Bleeding Air From Oil Fired Hot Water Heating System In A Four Story House

Heating time for immersion shower? [ 1 Answers ]

Hi there, We have an immersion to heat water for our shower and hot water for the taps. There's a timer in the hot press and outside we have on/off and sink/bath. We were told when we moved in that heating it for half an hour should do for a 20 min shower. We chose the sink option as it seemed...

No hot water from thermostatic mixer shower. Hot water coming from all other taps. [ 1 Answers ]

Hi, Yesterday out of the blue my mixer shower went cold. All the other taps in the house have hot water and the boiler seems fine. The hot pipe leading to the shower is still hot it just doesn't seem to be coming through. This is the shower I've got.. Homebase - Make a House a Home Any...


View more questions Search