Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to change a pull string light fixture to a wall switch controlled light.
[ 2 Answers ]
How do you change a pull string light fixture to a new light fixture with a wall switch. I have two wires running to the existing string light and am not sure what to do with those wires. I plan to change the light as well.
Add another light to a pull string switch
[ 11 Answers ]
I want to add another light to a ceiling mounted pull string switch light. The pull string switch light has two white leads to one side and a black lead on the other. How do I wire the two leads from my new light to activate when the string is pulled?
How do I replace the pull chain in a fan switch?
[ 1 Answers ]
The pull chain was pulled out of a zing ear 208s switch on my shop fan. Can I reinstall the chain without replacing the switch? If so, how? If not, where can I find a new switch?
Replace pull chain switch
[ 1 Answers ]
I have a celing fan with a light, i bought a new switch because fan did not work9three speed) i hooked it up but now the light works but fan does not. There are two yellow wires and one black wire and one whithe wire from the switch. There are two yellow wires and two black wires coming from fan....
Ceiling Fan Pull String 3-speed Switch
[ 1 Answers ]
What if someone by mistake wrongly connect the load on the switch (L) to one of the other wires (yellow, red, green)? Can this (cross wiring or mixing) cause (cross-wire) damage to the motor? Please help. I need this help urgently. View more questions Search
|