Ask Experts Questions for FREE Help !
Ask
    sires's Avatar
    sires Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 21, 2012, 12:43 PM
    I got the handle off 1400 series delta but I cant figure out how to take brass cover
    Delta 1400 series repair
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #2

    Jan 21, 2012, 02:15 PM
    Hi SIres

    Check out this video... should help. Be sure to SHUT off the water first, OK?



    Mark

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Delta Monitor 1400 Series shower handle removal? [ 5 Answers ]

I am attempting to repair a leaky Delta Monitor 1400 single handle shower assembly. I have removed the Allen type set screw, but the handle won't slide off, even with considerable pulling. I have pulled fairly hard, and am afraid to apply too much pressure, as I don't want to damage the plumbing to...

Delta 1400 Series Single handle shower [ 1 Answers ]

I too own a Delta 1400 and am not getting any water through the valve. I replaced the cartridge, still no water. Has anyone had this same problem? How to repair?

Delta monitor 1400 handle screw stack [ 6 Answers ]

Hello, I am trying to replace a leaky Delta 1400 series monitor valve. The very first stage is removing the handle... however, the screw inside is damaged and won't release/open. How can I remove the handle with the screw in there.. Thanks R

Delta monitor 1400 bath valve handle removal [ 1 Answers ]

Delta 1400 bath Valve handle will not come off. Set screw has been removed. Soaked in WD40, soaked in white Vinegar solution. Still will not come off. Handle is 2 pieces. Half of the handle unscrews and removes but main base of handle will not pop off Any help would be appreciated

Delta 1400 Series Single handle shower [ 9 Answers ]

I recently replaced the cartridge on my Delta 1400 series monitor single-handle faucet, and everything seem to have gone in to place OK, I did have some trouble removing the handle and the clamp brass ring initially as it had not been moved since installation (2002), but now when I turn on the...


View more questions Search