Ask Experts Questions for FREE Help !
Ask
    Oneill474's Avatar
    Oneill474 Posts: 427, Reputation: 2
    Full Member
    		  
    #1

    Jan 15, 2012, 01:10 PM
    Twist Lock Plug
    I guess I am out of luck. Twist Lock Plug will not fit into the three hole connector.
    See picture Unless there is some king of adapter. The other end works great fits into the socket well
    Of the weed trimmer okay. But the twist lock plug on the other end will not fit the three hole connector
    On the extension cord
    Attached Images
      
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Jan 15, 2012, 02:05 PM
    Did you have a question?

    No, a twist-lock plug will not fit a straight blade receptacle. You'll need to change one of them.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Making a twist lock power cord [ 5 Answers ]

I have a 5,000w Coleman Powermate generator. I just installed a Gould transfer switch. Now I just need to connect them together. The Coleman requires an L6-20P 3 prong and the Gould requires an L14-20R 4 slots. I cannot find any such cable. I can buy a Levitron L6-20 plug and a L14-20...

Emergen 10-12k 50 amp switch to L14-30 twist lock [ 6 Answers ]

Hi there I have a Briggs generator with the standard 30 amp twist lock output and have purchased a Emergen 10-12k switch that has a 50 Amp 3 prong twist input. Question how to I make a cable for this to connect between the two units. I know you use a 10/4 cable if it were a 30 amp but I don't...

Twist plug on bath not working [ 3 Answers ]

The twist plug on my bath is not working I have taken it off the front of bath and removed bath panel to get to the bit where the twist handle sits in but I can not see what to do now.

Male pigtale to Hubbell Twist lock receptacle [ 7 Answers ]

I want to assemble a pigtale -- one end will be a standard 125V female that will run a temporary lighting system and the other end a Hubble twist lock male that will connect to a HBL7310B (Hubbell 125V 20A ungrounded twist lock receptacle). The Hubbell receptacle is hooked to a generator which is...

What is a twist lock receptacle and purpose of use? [ 4 Answers ]

What is a twist lock receptacle and purpose of use?

View more questions Search