 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Washer vibrates excessively during spin cycle.
I have a Crosley Conservator machine, Model CAWB527MQ2 SER. CS2302050. I was having the problem of the machine not spinning enough to get all the water out of the clothing. So I replaced the clutch and motor coupling. Now when it spins, it spins so hard that the machine vibrates excessively. I'm not sure what's going on. The springs on the balance plate are all good. I make sure that the clothing is loaded evenly and proper water level. The balance load ring is charged(I checked this out due to another help answer question)
What could be the problem? |
||||
Check out some similar questions!
I have a whirlpool washer, I replaced the outer tub and the drive block, but it now doesn't spin. It drains the water, I can hear the motor come on, and feel the vibration . The switch is fine. I looked at the couple, but did not take it apart. The clutch looked fine, sanded the pads and case....
I have a Kenmore Elite Top Loading Washer, Model 110.24952300. When the washer goes to the spin cycle, it does not spin in the first spin cycle. It does this in the slow spin cycle that precedes the main spin cycle. When it cycles to the regular spin cycle, it does spin properly. I found that...
RE: kenmore 70 series model 110.20712990 Type 111 top load washer. Won't spin. Humming noise and a little burning/hot smell when supposed to be spinning. Bypassing the lid switch did not correct the problem. Changed out the motor coupling with no luck... still a humming noise but no smell.
I have a Kenmore washer model # 20722991. During spin cycle regardless of the amount of laundry in the tub it vibrates. Vibration is strong enough that the machine dances on the floor. I have tried distributing loads evenly, but that does not help. I ran it in spin cycle empty, but it still...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
