 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Have a ducane furnace the heat won't work
The inducer comes on then the blower moter right away but the gas valve never comes on the light comes on blinks 4 times says it's a high limit open but checked all limits pressure switch do you think it might be the control board
|
||||
Check out some similar questions!
I have a 1 and 1/2 yr. old system. Just started to experience the temperature rising above the set setting and the outside unit not coming on. If I reset the manhandler the unit starts and runs correctly for awhile. Could be 1,2,3 or more hours before it happens again. Just keep hitting breaker and...
I have goodman A42-20 furnace the blower works kicks on like it should but doesn't put out hot air evertime it kicks on. I have put a new thermostat on. Still the same. Can anyone help me?
AC works great - no problems. When switching over to Heat there is nothing; the circit board on the heater is getting power but nothing is turing on. The Honeywell Tstat is showing "HEAT ON" Trouble Shooting so far: Installed new 5 wire from the Tstat to the Heater/AC unit All the color...
The furnace is working fine however, the heat got weaker and weaker over several weeks and now there is no heat at all and the furnace come on flame is blue there is no heat at vents only cool air.
I would like to get a few oppinions of a ducane heat pump? I have already bought a 3 ton unit, I hope I done OK?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
