 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Hi all, Unsuccessfully tried to cap a copper water line by soldering a pre-soldered cap onto the end. Took all the proper steps, cleaned the ends of the pipe and fitting first, then applied flux around both. Wasn't quite sure what I should be heating, so I just heated everything. After my first...
Yes, that's right I would like to replace my flexible line with a copper line? How easy would this be and is it possible? Reason I need to install a saddle valve to hook up to a ro/di unit.
We just had an A/C unit installed. The unit is located outside. We notice that most of the lines that go to the attic in the house are covered/protected by tube foam cover and a drain pipe. However; there are 2 copper lines exposed and we wanted to know if they should be covered as well and if so,...
Hello again, Well, we forgot to call the furnace cleaning guy last year, so this year the man said we have a buildup of sludge in the line (the filter even had to be pried from the housing). He said the pump is running at vacuum and the line should be replaced. So I want to get some tips on...
We had a leak, so we had the water line and sewage line from the house to the street replaced. Now we have no water in the shower. Some debris most have clogged up the line coming into the shower. All the other lines are fine. My Dad is somewhat of a handyman and wants to fix the problem...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
