Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Small vibration while in 4x4 (2004 Chevy 2500 4x4)
[ 2 Answers ]
I am having a small vibration when I place my truck in 4x4. I can tell it only happens while in 4x4, because I put it in and out of 4x4 several times and it only happens when I put it in 4x4. It has 130,000 miles and have had little to no trouble with truck so far. I am not especially hard on...
95 chevy silverado transmission
[ 1 Answers ]
Hi was driving home in cruise control when it dropped out of overdrive and wouldn't go back in even off cruise I got home and stopped and now it will shift into reverse but will not go into any forward gear... any ideas
93 chevy s10 blazer 4x4 vortec, transmission pan removal?
[ 2 Answers ]
Any 1 know how to remove the trans. Pan to change the filter and leaking gasket? It has a cross member going from 1 side of the frame to the tramsmission, the to the other side of the frame , and if it was moved like 1 inch I could get the pan out, but not sure if that's safe Any 1 did...
1999 4x4 chevy silverado jerks forward when excelerating...
[ 1 Answers ]
It only jerks when I drive from fresno to madera and madera back to fresno for work. I think it is the driveline, but don't want to pay a lot for a diagnoistic test at a shop. When I accelerate it jerks one time and then after it stops... from work to home and home to work. It does it every time...
4x4 solinoid .or switch 99 silverado
[ 2 Answers ]
my service 4x4 comes on... the 4x4 still works I think but it takes a while to get it to switch out of 2wheel to 4 wheel... the lady I bought the truck from said that it needs a starter solinoid but I'm thinking maybe it just needs a new switch... any thoughts?? Thanks I appreciate any feedback View more questions Search
|