 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Honeywell rth7600d fan stuck on
I went away on business for a week and turned the system off via the thermostat as I generally do, when I returned the fan was on and I cannot get it to go off. System is set to auto but fan will not go into auto mode. Swapped out for mercury thermo and fan switches off as expected, what is going on?
|
||||
Check out some similar questions!
I manually opened one of my home's five Honeywell zone valves (V8043E-1012) by mistake. I meant to open a different valve. The one I opened had its thermostat set to its lowest temp setting, as it controls heat to a space I hardly ever heat. The next day the valve was still in the open position...
Hi, I recently bought a Honeywell thermostat RTH7600D to replace a old thermostat (containg a Mercury tube) in my condo. Heat pump is 20+ years old Climatrol 753-2-18W-10. The old thermostat is a Kepro 1262-1 (?) and had the following wires connected form the heat pump. Green wire to...
I'd be most grateful for some assistance in wiring a new Honeywell RTH7600D to a heat pump system that has AC as well as Aux and Emergency heat (which I guess makes it a multi-stage system?). My old system was a Honeywell 841A1217, which had the following wires; I wired them to the new system as...
Hi. My current system (Heat pump w/ Em Heat - Coleman) has the following 8 wires: B,0,L,X,W2,R,Y,G. I purchased a new Honeywell thermostat (RTH7600D1014 - touch screen model) which only has 1 O/B connector. I followed the instructions in the installation manual and connected the B wire to C, O wire...
My honeywell chronotherm thermostate is stuck flashing the temperature. How do I repair it or what can I replace it with?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
