 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How to wire a Noma thermostat that has only two wires?
I am replacing an old thermostat which has six wires with a Noma one that needs only two. The old unit has two whites together and two blacks together plus one more white and one more black. The thermostat is to control two baseboard heaters. Does anyone know how this will go together?
|
||||
Check out some similar questions!
I am trying to install a new Noma Thermostat, but I threw the old one away so I can't copy on the existing wiring. In fact, I have a red, a yellow, a green (that did not seemed to be used) and a black wire, but no white one. I had connected the black wire in the spot for the white wire but it does...
Noma I have o/b , y , r, g, w. I do connect why to yellow, are to red, g to green, w to white and o/b to? If I connect blue to o/b only AC works but no heat . But should I change to so AC and heat work. Thanks
I have white =w, green=g yellow=y red=r and o/b options on the new noma thermostat ( old thermostat was carrier )
Okay.. so here is the deal , went out bought a digital themostat today , the guy at the store told me it would be easy... but I don't think I set it up right because I am FREEZING! I have 4 wires... 1-Red 1-Blue 1-Yellow 1-Green Now.. I attached all the wires correctly... however I am...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
