Ask Experts Questions for FREE Help !
Ask
    Bigadron's Avatar
    Bigadron Posts: 2, Reputation: 1
    New Member
     
    #1

    Jan 8, 2012, 07:45 AM
    Power board
    I'm doing reseach on building a power board for a friends project. He wants to use a 30 amp relay to run four 1000 watt ballasts at 240 volts. Now my question is can we wire two standard 120volt duplex outlets to run at 240 volt so he doesn't have to buy the ridiculously overpriced 240 volt power cord as the cord supplied with the ballasts are rated for 300 volts. Thank for your time
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    Jan 8, 2012, 07:52 AM
    Don't use 120 volt outlets, code violation, And really dangerous, Just make up connections in electrical box and cover and you don't need the recepticles.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #3

    Jan 8, 2012, 08:33 AM
    Quote Originally Posted by Bigadron View Post
    I'm doing reseach on building a power board for a friends project. He wants to use a 30 amp relay to run four 1000 watt ballasts at 240 volts. Now my question is can we wire two standard 120volt duplex outlets to run at 240 volt so he doesn't have to buy the ridiculously overpriced 240 volt power cord as the cord supplied with the ballasts are rated for 300 volts. Thank for your time
    Everything is typically rated for 250-300V, if not 600V. That is a max rating.

    So you want to rig up something dangerous and extremely code-illegal just to avoid buying a cord?
    I am actually confused as to what you need. If the ballasts have cords why do you need new ones?
    Bigadron's Avatar
    Bigadron Posts: 2, Reputation: 1
    New Member
     
    #4

    Jan 8, 2012, 10:07 AM
    The cords supplied with his ballasts r standard 120 cords (ie: two vertical blades, one small one big, and ground plug) and they ones they want him to buy have two horizontal blades with ground plug and they want 20 bucks a piece. He thinks he can use standard 120 receptacles with the cords that came with his ballasts, I think he should get the 220 cords and receptacles to be safe. Im not trying to "rig" something dangerous or code illegal, I'm trying to prove to him that it shouldn't be done his way and why.
    @Stratmando, do u mean hardwire the ballast plugs?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #5

    Jan 8, 2012, 10:29 AM
    If they came with 120v plugs then I assume they are multi-tap fixtures that came pre-wired for 120v.

    You do not need to replace the cords. Just replace the plugs with 240v plugs. You can probably get them for around $10 each.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #6

    Jan 8, 2012, 03:56 PM
    I was speaking Hardwired.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Extra Circuits on my power board ? [ 3 Answers ]

This is a 100+ year old house and we have some really ancient wiring. I think the whole house is ran off 2 circuits that are 30 amps each. Using 2 - 15 amp glass fuses. The round kind that screw in. On the powerboard there is the main 60 amp box, a main power switch and something called...

Upgrading the power supply on an OEM board [ 1 Answers ]

Hello fellow compatriots. I bought a "Lenovo/IBM Series 3000 J115 (7387-26U)" from office depot. It's a pretty cool system with 250GB H/D, 1 GB Ram in 2x512 modules, 16x DVD R/W etc. The motherboard is a MSI-7283, and the pwer supply is 220W. The on-board video is Geforce 6100, and I wanted...

Board on furnace doesn't light up, no power to heating/ac [ 1 Answers ]

So the dog chewed through the control wires from the heating unit to the condenser outside. I have replaced those wires. BUT now the board on the heating unit in the garage seems to not have power. I am guessing this because the board usually has a red light on when it's plugged in, but it's not on...

Power to furnace control board but stops there [ 3 Answers ]

Hi I was given a Nordyne KG6RA gas furnace. After installing, I turned on and there was a low hum when the power got to it. I held the door switch closed so I could see. After a few seconds there was a spark and then blue smoke and everything went dead. I could not see where the smoke came...

Power supply and sys board/cpu [ 2 Answers ]

Can I use a power supply that says "for pentium 4" with a pcchips board and an AMD sempron 2700? Supply is a 400.


View more questions Search