| 
 
 
 
 
 
  Not your question?
  Ask your question
  View similar questions
   
 Add your answer here.Check out some similar questions!
Extra Circuits on my power board ?
 [ 3 Answers ]
 This is a 100+ year old house and we have some really ancient wiring. I think the whole house is ran off 2 circuits that are 30 amps each. Using 2 - 15 amp glass fuses. The round kind that screw in. On the powerboard there is the main 60 amp box, a main power switch and something called... 
Upgrading the power supply on an OEM board
 [ 1 Answers ]
 Hello fellow compatriots. I bought a "Lenovo/IBM Series 3000 J115 (7387-26U)" from office depot. It's a pretty cool system with 250GB H/D, 1 GB Ram in 2x512 modules, 16x DVD R/W etc. The motherboard is a MSI-7283, and the pwer supply is 220W. The on-board video is Geforce 6100, and I wanted... 
Board on furnace doesn't light up, no power to heating/ac
 [ 1 Answers ]
 So the dog chewed through the control wires from the heating unit to the condenser outside. I have replaced those wires. BUT now the board on the heating unit in the garage seems to not have power. I am guessing this because the board usually has a red light on when it's plugged in, but it's not on... 
Power to furnace control board but stops there
 [ 3 Answers ]
 Hi I was given a Nordyne KG6RA gas furnace. After installing, I turned on and there was a low hum when the power got to it. I held the door switch closed so I could see. After a few seconds there was a spark and then blue smoke and everything went dead. I could not see where the smoke came... 
Power supply and sys board/cpu
 [ 2 Answers ]
 Can I use a power supply that says "for pentium 4" with a pcchips board and an AMD sempron 2700? Supply is a 400. View more questions Search 
 |