Ask Experts Questions for FREE Help !
Ask
    OferT's Avatar
    OferT Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 10, 2011, 04:15 PM
    Bath Faucets
    Hi

    My bath faucet was broke and I can't find the brand name on any of the parts. It is Tub Faucet with Handshower, the only thing I found is KK inside a square, P 278, and B (N F) N Airforce

    Can you please help?

    Thank you
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #2

    Apr 10, 2011, 04:22 PM

    Hi OferT...

    Without a name brand or a picture of the faucet we can't help here... sorry!

    Heck, even with a picture we can't always identify the valve as there are literally hundreds of different shower valves nowaday... ;)

    Post a pic. Or take a picture or the trim/handle from the faucet over to a local plumbing supply store... see if they can help you here.

    Good luck!

    Mark
    rprodan's Avatar
    rprodan Posts: 1, Reputation: 1
    New Member
     
    #3

    Jan 6, 2012, 02:06 PM
    Hi,

    I found exactly the same thing on my kitchen faucet, but I cannot find and brand.I need to fix it. Did you find out the name of the brand?

    Thank you!
    flord2012's Avatar
    flord2012 Posts: 1, Reputation: 1
    New Member
     
    #4

    Aug 26, 2012, 02:01 AM
    Pyramis brand
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #5

    Aug 26, 2012, 07:55 AM
    Here's more information for you.
    Re: Pyramid Faucet
    Elai Sanitary Ware
    East mawan Road, Xinhe, Tianhe, Longwan, Wenzhou
    Post code : 325611
    Tel: 086- 0577-62270028
    Fax: 086- 0577-62270358
    Email:[email protected]
    Give them a call and explain your problem. Good luck, Tom
    putneychap's Avatar
    putneychap Posts: 1, Reputation: 1
    New Member
     
    #6

    Feb 20, 2013, 06:29 PM
    Hi

    I had the same problem so tried searching the sites of Pyramis and Pyramid, but neither offered the 'tap end' or knew what I was after. I say 'tap' rather than 'faucet' because I'm British.

    So, I tried searching on eBay UK for 'tap end' and it threw up several items otherwise known as 'tap aerators'. Then I checked it was the male part I wanted (this screws into the end of the metal pipe, hence it is 'male').

    Finally I checked the size, 22mm, which matched perfectly.

    Total price,including post and packing = £2.00 (about $3.00)

    This may still work - try searching under item number 230695688904.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #7

    Feb 21, 2013, 07:14 PM
    Hi Putneychap!

    Awesome update! Thanks for posting!

    Mark

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Black water pipe underneath bath tub, is that connected to bath? [ 1 Answers ]

Hi, I'm taking apart my bath tub I guess its fiberglass I'm cutting it in pieces because I don't know any other to do it, but I saw that it has a black drainage pipe right in the middle of the tub underneath. Is that connected some how and can I cut around it or do I have to disconnect it from the...

Shower and bath faucets [ 1 Answers ]

I had low water pressure coming out of shower head and water continued to flow from Faucet below, I replaced the diverter with a new one but the problem still exists. Do Have an idea what I could do to fix the problem?

Bath Room Faucets water not working [ 3 Answers ]

When I trun the faucets on in the bath room the water only comes out very little both hot and cold and then none at all.

Bath Tub Leaky Faucets [ 1 Answers ]

I replaced the bathtub faucets (they have never been replaced). Install the same measurements of Stem and seat. I have a continuous leak (dripping). Oh by the way the deviator does not have a seat, however there is a seat installed in pipe. Can you help?

Old bath tub faucets without set screws [ 1 Answers ]

Hi all We are redoing our master bath. The house is 16 years old and the bathtub faucets do NOT have set screws that we can see. There is a small indent on the side of the handle the size of a flat head screwdriver and that's it. My husband is tempted to cut these off... please HELP! I can...


View more questions Search