Check out some similar questions!
Having wiring problems installing my honeywell rth221
[ 0 Answers ]
I installed a new honeywell rth221 t-stat. All the wires from the old t-stat were then placed on the new t-stat (yellow to yellow, white to white, red to red, green to green except for a black one. I just pushed it back to the wall. I turned the unit on cool and then it seems like it is getting...
Wiring for Honeywell RTH7600D, old system was Honeywell T841A1217
[ 2 Answers ]
I'd be most grateful for some assistance in wiring a new Honeywell RTH7600D to a heat pump system that has AC as well as Aux and Emergency heat (which I guess makes it a multi-stage system?). My old system was a Honeywell 841A1217, which had the following wires; I wired them to the new system as...
Wiring problems: Carrier to Honeywell thermostat
[ 1 Answers ]
I currently have a Carrier thermostat and I THINK the model is 2996-003396 but I'm not sure if I'm reading the correct label. It has the following wires: W, Y, G, R, C, O/W2 (orange wire in with a yellow jumper to L), L, S1, S2 I have purchased a new Honeywell thermostat model RTH7600 (I'm...
Installing Honeywell RTH6300B from an older 7 wire Honeywell. PROBLEMS
[ 4 Answers ]
Hello everyone, I am new here. I found this site which trying to troubleshoot my problem. Any assistance would be GREATLY appreciated. Basically I have an older honeywell programmable thermostat with 7 wires attached. They are as follows... C - Black wire L - Blue wire R- Red wire W2 - brown...
Replacing Honeywell T8411R with Honeywell RTH7500 - wiring problems
[ 1 Answers ]
I need help getting my new, programmable thermostat to work. I currently have a dual-stage Heat Pump and A/C unit that works fine. The current thermostat is the Honeywell T8411R. I don't know the number for the subbase, but it's the one that came with the thermostat. The current (operational)... View more questions Search
Add your answer here.
|