[matthew1987]

It won't go into park immediately and it causes the key to be stuck in the ignition

[TxGreaseMonkey]

Automatic Transmission Gear Position Switch Replacement
(Check adjustment or replace)

1. Remove console and disconnect 14-P connector from switch.

2. Remove both console switch mounting nuts.

3. Position switch slider to "Neutral."

4. Move shift lever to "Neutral," then slip switch into position.

5. Attach switch with both nuts.

6. Test switch in Park and Neutral positions of shift lever. Engine should start, when shift lever is in Neutral (anywhere in the range of free play).

7. Connect 14-P connector, clamp harness, and install console.

*The ignition key cannot be removed from the ignition switch, unless the shift lever is in Park. When the shift lever is in any position other than Park, a solenoid is activated, making it impossible for the key to be removed until the shift lever is moved to Park.