Ask Experts Questions for FREE Help !
Ask
    russell1975's Avatar
    russell1975 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 3, 2012, 06:56 PM
    Water pressure problems
    Tested the pressure at the hose bib,and my water pressure is 110. If the pressure is so high, why do I have such a significant pressure drop when I flush a toilet?
    Marine121's Avatar
    Marine121 Posts: 4, Reputation: 1
    New Member
     
    #2

    Jan 3, 2012, 07:29 PM
    You most likely have bad valves some where or there is a problem in the water differebtial exchange system.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #3

    Jan 3, 2012, 09:00 PM
    A home with 110 psi would normally have a pressure reducing valve (prv) does you home have one, it could be malfunctioning.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #4

    Jan 4, 2012, 06:42 AM
    How old is your home and what material are the water pipes? Copper, plastic or galvanized?
    Bob's asking about a PRV valve,(see image). This PRV valve will be found where the water enters your home. Do you have such a valve installed?
    110 PSI is over twice the average house PSI of 45 PSI. At 110 PSI this puts a strain in fittings and faucets.
    why do I have such a significant pressure drop when I flush a toilet?
    If I had to guess I would guess old galvanized pipes that are choked with rust that's cutting down the volume. You're simply running out of water and with that comes a loss of pressure. Does that sound correct to you? Let me know, Tom
    Attached Images
     

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Water Heater problems, no water flow after pressure valve change [ 4 Answers ]

I changed my pressure release valve, now I can not hot water flw in my house.

Water Well Pressure Problems [ 4 Answers ]

I'm having trouble with my well and I know nothing about them! Sometimes I have water when I turn on faucet and sometimes I do not. Sometimes water will be on when I turn on faucet and then go off. When the water is running it is like I can hear the pressure in the pipes fluctuating (going up &...

Well Water Pressure Problems? [ 0 Answers ]

I have a water well system that has worked fine in the past. Now it has no water or very little. I have already changed the pump and took the old pipe out and reinstalled new pipe. No change. It's a 30 foot well. I have a pump above ground with a pressure tank connected to it. Can anybody help me...

Water pressure problems well [ 1 Answers ]

My water pressure went low some time ago, today the water in my home almost completely stopped, it hardly runs. When running the water in one faucet or the tub, it will not run in another. Does anyone know what the problem could be?


View more questions Search