Furnace fan turns on but burners don't light

linda1602 Posts: 3, Reputation: 1

New Member

Jan 2, 2012, 04:51 PM

Furnace fan turns on but burners don't light - electronic pilot

Night and Day model 80U-19A
Electronic burner lighter does not function

JAG2666 Posts: 2, Reputation: 1

New Member

Jan 3, 2012, 03:47 PM

It sounds like the thermocoupler went out. Pretty easy to fix and not too expensive if I remember correctly.

Add your answer here.

Check out some similar questions!

Furnace problem: pilot light working fine, main burners not a'tall [ 1 Answers ]

Okay, so I've got a gas furnace, maybe 10 yrs old. Went to turn on the heat for the first time this season and am encountering this problem; Pilot light is on and functioning apparently great, but the main burners will not light. It appears as if nothing is happening at all when I adjust the...

Goodman pilot light on but furnace burners will not come on? [ 4 Answers ]

We have a Goodman furance that will not produce heat. The pilot light is on, the gas is released, but the burners will not kick in. Do you have any idea what is causing this problem.:confused: Scott's Chicago

Pilot light burns burners won't [ 3 Answers ]

The standing pilot light is on but the burners won't ignite. The fan runs. Could a bad thermocouple cause this. I know that there are many other problems possible but this is the cheapest place to start.

Intermittent pilot light burns well but main burners do not light [ 1 Answers ]

I have an Olson furnace with intermittent pilot light with electronic spark ignition. There is a Honeywell S8610U furnace controller. When thermostat calls for heat the ignitor sparks and the pilot flame lights. The flame continues to burn while the ignitor continues to spark for about 5+...

Furnace trouble. Pilot lights. Burners light but then go out. Evetually stay on [ 2 Answers ]

Hi all, I searched through this site a bit and found some helpful topics, tried a few things and I'm still have the same trouble. I have a Bryant furnace that uses a Johnson Controls G779LHA-1C Ignition Control. The ignition control is new, I just replaced it a week ago. It's hooked up so...