Ask Experts Questions for FREE Help !
Ask
    digitalmonkey's Avatar
    digitalmonkey Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 2, 2012, 02:16 PM
    Furnace will kick on only if I reset the power at the furnace
    I have a Carrier Furnace and a Honeywell CT3200 Programmable thermostat, about 5 years old.

    I have it set on Auto and Hold Temp 72 degrees

    The furnace quit working a few days ago. The only way to get the unit started again was to reset, turn off and then turn on again, the power at the furnace.

    I replaced the batteries, using brand name alkaline, in the thermostat, and the unit continued to work fine for 2 more days. Now the problem has returned, only with a twist.
    Now the unit will cycle just fine for 3 or 4 hours, then need to be reset.

    Is it my thermostat?
    digitalmonkey's Avatar
    digitalmonkey Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jan 2, 2012, 02:27 PM
    The furnace is a Carrier 58PAV
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

York furnace did not kick in today until I power of and on the unit. [ 0 Answers ]

York furnace did not kick in today until I power of and on the unit... any idea what could be the problem ?

Gas Furnace would not restart unless power is reset [ 5 Answers ]

Hello, I have a carrier furnace that works well once started for anywhere from 1 day to a week at a time and then seems to fail to restart. Once the power to it is reset (flipping the breaker off and back on) it seems to start fine and keeps on going stopping at the temp that is set and then...

How do I reset control power,on york furnace [ 1 Answers ]

I reversed line power on my furnace not knowing that it would lock out control altogether, is there a manual reset?

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...

My intertherm furnace pilot lights but furnace won't kick on [ 5 Answers ]

I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...

View more questions Search