Geyser hot water output is too little

royraghubir Posts: 1, Reputation: 1

New Member

Jan 1, 2012, 01:11 AM

Geyser hot water output is too little

The hot water output volume or pressure of my recently installed water heater is low. Other things are OK. What is the reason and what can I do to rectify this?

Check out some similar questions!

No hot water coming out of hot water side only cold... hot water heater is working [ 3 Answers ]

Hello, I need help bad. I am a woman writing to you whose husband has given up on the problem and will no longer work on this. He doesn't care if we have hot water cause he can take a shower at work. I cannot. It is the dead of winter here in Colorado. We had frozen pipes that burst in the wall...

How to resolve hot water from a geyser going in to the cold water system [ 1 Answers ]

We have a problem with hot water going into the cold water taps. The geyser element was replaced.

Cold water overflow from geyser. [ 0 Answers ]

After installing mixers in the bathroom basin and bath we are getting cold water overflowing from the geyser every time we open the mixers for cold water what could the problem be?

In how much time the temperature in a hot water geyser drop by 20 degree centigrade [ 0 Answers ]

I want to know about the time taken for a drop of 20 degree centigrade in temperature in a hot water geyser?

Installing a 2nd water geyser [ 1 Answers ]

Hi there, I live in south africa and just started a plumbing company, I recently installed a 2nd water geyser to a large house just to run there 2nd bathroom what has his/hers basind jacussi and a shower and toilet. The main water supply is 3/4 but reduces to 1/2 straight away and that feeds...

View more questions Search

Check out some similar questions!

Add your answer here.