Ask Experts Questions for FREE Help !
Ask
    sutonoh's Avatar
    sutonoh Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 5, 2010, 01:52 AM
    PEX Pipe For Refrigerant?
    I try to use PEX pipe to replace copper pipe for Aircorn units. I try to use R22 and R410. The result after 6 month still working and no leaking and cracking on the pipe. My question is : The PEX can stand the Refrigerant, Why no body apply it.
    Darkwatcher's Avatar
    Darkwatcher Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Dec 31, 2011, 06:02 PM
    With ARC piping as the new standard for copper. And PEX can not take the high pressure from my understanding.
    Question to you is the PEX still holding and what is the length and dia of the PEX?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Is there an Iron Pipe x PEX crimp fitting out there? [ 5 Answers ]

This is a hydronic heating application question. I am gut-remodeling a 1920's 2-story. I want to save the cast iron radiators. I ran PEX for the heating runs to each radiator but don't want to come through the floor with PEX. So, my question is (since I think there is a risk of corrosion...

Can I use a shark bit on wirsbow pro pex pipe [ 0 Answers ]

PEX Re-pipe [ 2 Answers ]

Looking for info on how a PEX re-pipe is suppose to look. I'm re-piping through the attic and intend to use a manibloc but have no idea what it should look like.

Pex pipe dia: how do size? [ 2 Answers ]

I would like to slowly re-plumb my house with pex pipe. I would like to use the smallest dia. Pipe to reduce volume of hot water wasted. How do a figure if it can be done with 3/8. Or is this just out of the question. The longest run to a bath room is 50ft; The short to the kitchen 40ft. Water...

PEX pipe [ 1 Answers ]

I need to run some water lines for a bathroom I am installing in my basement. All the water line in my house now are PEX lines. If I need to run lines for sink,toilet and shower can I tap into a hot and cold line any where and use one line split off three ways too run all. Or is there a better way...

View more questions Search