Ask Experts Questions for FREE Help !
Ask
    omar.j's Avatar
    omar.j Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 29, 2011, 10:54 PM
    Goodman furnase starts fine but flame quits
    Like I say starts fine but flame quit an will everything keeps working, but the burner goes on and off for a wile until it stays on

Check out some similar questions!

My 1985 toyota pickup starts fine idles fine but runs ruff when in gear [ 2 Answers ]

My 1985 toyota pickup starts fine idles fine but runs ruff when in gear

I have a goodman arus 048-00a furnase blower runs at half speed when system shuts off [ 0 Answers ]

I have replaced the circuit breaker (would not reset) and the blower cage (worn out). The system is about 5 years old. So fa

Gas furnace -thermo clicks a buzzing starts.Gas flame starts for 10 secs & stops [ 0 Answers ]

I have an old Sears Power Miser Natural gas furnace. It doesn't always come on, but when it does the thermostat clicks and a buzzing starts. You can hear the gas flame start and then 10 seconds later it shuts off. If I turn the fan on manually (before the 10 seconds is up) the flame remains burning...

Runs fine until I disengage brake? Then it quits... [ 1 Answers ]

I have a Sears Craftsman Lawn Tractor w/Snow Thrower attachment. I was blowing snow, when all of a sudden it killed. I disengaged the attachment, engaged the brake, and restarted. Runs fine - until I disengage the brake. Any ideas? I've tried re-starting 5 times - same result each time.

Beckett burner starts has flame for about 15 seconds off for 12 then flame on & runs [ 7 Answers ]

I have replaced the following with the problem still happening: replaced the primary control(R8184G 4009), cad cell--the oil unit was service at the beginning of the heating season. Ran like a champ. Now for the past two weeks with new parts the problem is: Oil burner starts with a flame for...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.