Ask Experts Questions for FREE Help !
Ask
    patrick37064's Avatar
    patrick37064 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 29, 2011, 06:46 AM
    Furnace runs all the time
    I have a Goodman GMP125-5 and the fan runs all the time even with the thermostat off and the fan to auto. The gas never comes on. The only way to stop it is to turn off the power to the unit. I have done the following.

    Circuit board LED blinking 4 times so I tested the overlimit switches. All are in closed and in testing the overlimit circuit from the board to the gas valve it showed a closed circuit on my VOM.

    Tested the pressure valve by turning the power to the unit on so the inducer motor would start and the pressure value switch closed. I assume this switch is "open" when the motor is off and "closed" once the inducer motor comes on and creates enough pressure on the valve.

    I feel I have eliminated both the overlimit safety (closed circuit) and the pressure switch (closes once the inducer motor is on) as issues so why do I still get 4 flashes on the LED?

    Any ides on what I should check next? Is there any way to test the circuit board?

Check out some similar questions!

Goodman Furnace fan runs all the time [ 0 Answers ]

I have a Goodman GMP125-5 that runs all the time even with the thermostat off and the fan to auto. The only way to stop it is to turn off the power to the unit. I have done the following. Circuit board LED blinking 4 times so I tested the overlimit switches. All are in closed and in testing the...

Rheem furnace runs for a short time, goes out, then repeats. [ 1 Answers ]

My Rheem furnace lights up runs about 20 seconds burner goes out the n relights for another 20 seconds then goes out

80% efficient furnace only runs for about 10 minutes at a time. [ 1 Answers ]

Gibson GL1RC040 furnace fan runs all the time [ 0 Answers ]

Our New Gibson Furnace blower fan and draft inducer fan started running all the time no matter if the stat is on or off even unhooked the stat and still runs. The light on the circuit board is flashing a code 1. Does anyone have any experience with these furnaces and this problem? Thank You

Furnace heats home VERY slowly, runs all the time [ 4 Answers ]

Everything may be fine with my system, but it seems that it is taking a very long time for the home to heat up, which results in the furnace running all the time. The natural gas furnace is struggling to even get to the 68 degrees the thermostat is set to, and the temperature is only in the 30s...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.