Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Gas furnace -thermo clicks a buzzing starts.Gas flame starts for 10 secs & stops
[ 0 Answers ]
I have an old Sears Power Miser Natural gas furnace. It doesn't always come on, but when it does the thermostat clicks and a buzzing starts. You can hear the gas flame start and then 10 seconds later it shuts off. If I turn the fan on manually (before the 10 seconds is up) the flame remains burning...
Can anyone tell me why there is a rumble in my heating ducts when my furnace kicks in
[ 2 Answers ]
I have a furnace (Natural Gas) that aove r the laswt three years that rumbles when the heat goes on. At first I thought it was our neighbour taking his garbage out over a newlay laid concrete stairway. We know it is not that . He doesn't have that much garbage. It is beginning to concern me but...
Payne PG9M furnace makes noise rumble shakes can't find the source of it.
[ 3 Answers ]
Well I have looked and looked but can't seem to put my finger on it. It's obviously a noise, best description I can give is I was in the basement and I thought a helecopter or train was going by the house. Nope, it was the furnace. So it's a low rumble vibration from the furnace. Here's the...
Central heater furnace starts and blower starts for 30 minutes and then fan shuts off
[ 1 Answers ]
We start our central heater and the furnace kicks in and then the blower starts and the house warms up but when it reaches the desired temperature. When the temp. drops and you can hear the furnace start but the blower will never kick in. If we shut off the whole thing and wait about 1 hour, we...
Furnace very loud rumble in it's burning series
[ 1 Answers ]
I have a furnace Beckett Model "afg" series oil burner that just started today very loud rumble when in it's burning series. If anybody knows the answer would appreciate the feedback as soon as can. Thanks View more questions Search
|