 |
|
|
 |
New Member
|
|
Dec 26, 2011, 11:55 AM
|
|
Lost power to the outlets
I had too many things pluged into one outlet, then plued one more in and everything went out. Checeked the breaker and it did not shut off. Checked the fuses and they are all good. Two outlets went out when I did this. Checked power to the outlets and nothing. If I replace the outlets would that fix the issue or do I need to call in an electrican.
|
|
 |
Uber Member
|
|
Dec 26, 2011, 12:44 PM
|
|
Make sure you flip the breaker all the way off and then all the way back on. Is this a GFCI circuit? Pull the outlets on either side of the non working ones and see if a wire is disconnected or burned, particularly if they are back stabbed.
|
|
 |
New Member
|
|
Dec 26, 2011, 01:20 PM
|
|
Double checked all of the breakers, no it is not a gfci. A hallway light right next to the two outlets is also not working. Would the issue be a wire behind an outlet?
|
|
 |
New Member
|
|
Dec 26, 2011, 01:22 PM
|
|
Its not a gfci. Also, a hallway light right next to the outlets is not working. If I replace the outlets could this correct the issue?
|
|
 |
Uber Member
|
|
Dec 26, 2011, 05:32 PM
|
|
Would be extremely rare to find 2 bad outlets. More than likely you burned a wire or possibly burned a contact if the outlets are backwired. Follow my first reply, Brian ma0641.
|
|
 |
New Member
|
|
Dec 27, 2011, 07:36 AM
|
|
How would I replace a Contact or fix a Backwire?
|
|
 |
Uber Member
|
|
Dec 27, 2011, 08:07 AM
|
|
I think the best suggestion would be to hire an electrician to come in and find the fault, loose connection, and repair as necessary.
|
|
 |
New Member
|
|
Dec 27, 2011, 08:16 AM
|
|
Would the connection be inside the wall or at the outlet?
|
|
 |
Uber Member
|
|
Dec 27, 2011, 08:19 AM
|
|
Most likely at a receptacle, and not necessarily at the one that has no power. It can be anywhere in the circuit.
|
|
 |
Uber Member
|
|
Dec 27, 2011, 10:44 AM
|
|
Your answers suggest a lack of electrical experience. Even 120VAC can kill you. Suggest you get a qualified person as TK suggested.
|
|
 |
New Member
|
|
Dec 27, 2011, 11:56 AM
|
|
Thank you. But if it is just a outlet. I have replaced many of those in the past. But if it's a wire, or junction box in side the wall. Then I don't want to get involved with that much.
|
|
 |
Uber Member
|
|
Dec 27, 2011, 01:05 PM
|
|
If you are comfortable with an outlet, look. Turn off the power at the breaker, start pulling outlets and I'll bet it's a burned or disconnected wire.
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
I lost power in all the outlets in just one room, what do I do?
[ 2 Answers ]
Happy hollidays everyone, so, I'm sitting in the front room watching TV and all of a sudden all was dark. I checked the breaker box and one of the smaller switches was moved a bit to the "left" side, I then moved it back to the "right" and it stayed, but still no power to the front room. Do I need...
Washing machine fried two outlets and lost power in living room
[ 5 Answers ]
Hi everyone,
I'm not very informed on the electrical workings of a house so please bear with me!
Last night my washing machine, located in the laundry room of the basement stopped working. It had been working perfectly up until then. I tested the dryer next to it and it worked and everything...
View more questions
Search
|