Furnace not running,code flashes 3short flashes by 1 long flash on a bryant 90 t

LucyLou2 Posts: 1, Reputation: 1

New Member

Dec 24, 2011, 11:57 AM

Furnace not running,code flashes 3short flashes by 1 long flash on a bryant 90 t

Code flahes 3 short flashes by 1 long flash

wmproop Posts: 3,749, Reputation: 91

Ultra Member

Dec 24, 2011, 01:30 PM

It would really help us to help you if we knew the brand name and model number of your furnace

wmproop Posts: 3,749, Reputation: 91

Ultra Member

Dec 24, 2011, 01:33 PM

Sorry didn`t see the

Add your answer here.

Check out some similar questions!

I have a york furnace, flash code is 12 flashes [ 0 Answers ]

I have a york furnace model gy9s060b12up11k. Flash code is 12 flashes. The burner fan comes on then clicks off. Igniter does not come on but blower fan stays on. No heat. Any ideas?

My furnace fault code light flashes three times the pause and flashes three times aga [ 3 Answers ]

My furnace fault code light flashes three times the pause and flashes three times again and repeats. What is wrong?

General 90-112 flash code chart or 6 flashes diag [ 0 Answers ]

Induction fan come on 3 saconds and red flashing 6 times and lock out.

Furnace code flashes 2 times [ 1 Answers ]

My Trane XR80 furnace is showing a flashing code of 2. The manual indicates it as external lockout. Any ideas as to what this means and how to repair it?

Still have error code on Bryant gaspac 8 flashes [ 6 Answers ]

For Northernheat Still getting code of 8 led flashes. Have checked the flame sensor not cracked or touching anything and is in the flame. The only time that it seems to happen is when the temp gets colder like 32/34 after being 38/40. The LED error code states Internal control fault ...