Ask Experts Questions for FREE Help !
Ask
    Nayehi's Avatar
    Nayehi Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 21, 2011, 02:57 PM
    Whirlpool washer spins slowly or not at all
    Whirlpool direct drive washer model LSL9244EQ0. Washer hasn't been used in few years. Seems to wash OK. But when it spins with a load, spins very slowly or not at all. If it's empty, I can stop basket with my hand. Could it be transmission or clutch? Can't remember but I think it clicks when not spinning. Transmission=throw away, clutch=repair. TIA
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Dec 22, 2011, 10:58 AM
    Sounds like the clutch is slipping from wear or dirt.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool washer SOMETIMES spins [ 2 Answers ]

My top load Whirlpool will spin sometimes and sometimes not. Or it will start and then stop. It drains and agitates just fine. If a part is broken, how can it sometimes work?

Whirlpool washer spins slowly on high spin setting [ 1 Answers ]

What controls the spin speed of the whirlpool washer? I have one which is less than 5 years old and it spins faster on slow spin cycle than on the high spin cycle. Please give me any ideas you might have as to why this occurs. Thanks Gary

Whirlpool washer spins slow [ 0 Answers ]

My whirlpool washer spins slow

Kitchenaid washer spins too slowly [ 0 Answers ]

My kitchenAid washer when in spin cycle, spins very slowly and clothes are too wet to put in the dryer

Whirlpool washer spins as it drains [ 1 Answers ]

My Whirlpool washer is old but I haven't had trouble from it until now. Model# A5550XPW7... serial#CX2964691. It leaves water in the tub at the end of the wash and rinse cycle. More water with each cycle. Yesterday I took off the hoses and checked for blockage and nothing. It drained the standing...

View more questions Search