Bleed screw calculation for torque?

rezaeefard Posts: 1, Reputation: 1

New Member

Dec 19, 2011, 11:43 PM

Bleed screw calculation for torque?

Which equation is used for bleed screw?

TxGreaseMonkey Posts: 16,761, Reputation: 5597

Uber Member

Dec 20, 2011, 04:44 AM

Where are you coming from?

Bleeder screws are just snugged up by hand, likely around 60 lb.-inches.

Add your answer here.

Check out some similar questions!

Air bleed vent screw located on the thermostate housing [ 8 Answers ]

I'm changing the antifreeze for winter and wanted to flush the system. The procedure calls for draining the radiator which I have figured out but it also says to vent the engine by loosening the air bleed vent screw located on the thermostat housing. Is this the housing the thermostat goes in for...

Need help with Calculation of torque required [ 6 Answers ]

Hi to all members, I having problem finding the torque required for the motor to rotate the lever beam clockwise... hoping someone can guide me solve the problem... This is the image I attach... http://img838.imageshack.us/i/31088063.jpg Thanks

Software for torque calculation in wheel [ 0 Answers ]

What are the requirement of torque for rotor

Calculation of Torque, [ 22 Answers ]

Hi, I would like to calculate the torque of a system, I have described the system below, Consider the conveyor belt, the motor rotates the conveyor belt (25 Meters), I want to do a reverse engineering, Let say the I don't use the motor to run the conveyor, instead I have a handle (1 meter)...

Bleed brakes--max torque to close bleed valve screw? [ 1 Answers ]

Working on a '99 Miata. Changed the right rear caliper, but cannot find information on the maximum torque to close the bleed valve screw. My repair manual does not have this information nor the Kragen store nor the website of the manufacturer--Cardone. Any help will be appreciated. Thanks.