Check out some similar questions!
Humidifier connections to Trane XCM95 furnace
[ 0 Answers ]
Want to connect a rotating drum humidifier requiring 120volts to the controller of a Trane XCM95 furnace. Do I use the two leads in the junction box labeled "hum" to obtain power? Is there any programming required to activate these leads to supply voltage when the furnace is running?
How high canI place roof vents for a Trane gas furnace
[ 0 Answers ]
I have a Trane XR90 propane furnace and my question has to do with venting. Currently there are two vents on the roof one exhaust the other for incoming. The exhaust vent is about 3ft and the input is 2 ft. The vents are near a valley formed by the house roof and the garage roof (like a V). I am...
Goodman humidifier My humidifier blow motor does not come on when the furnace is runn
[ 2 Answers ]
My humidifier does not come on when the blow motor kicks in Instead the humidistat energizes the cellenoid and it stays on. Should not the blower motor turn the cellenoid on?
Furnace humidifier
[ 1 Answers ]
Hello, I have a problem with my furnace hunidifier, model Aprilaire... When I turn the heat on and the blower starts working, there is a water running non stop. I know that this is from my humidifier, but can anyone help me and tell what is wrong? The water just runs and runs and stop only when I...
Aprilaire humidifier-trane xe 90
[ 1 Answers ]
Can anyone tell me how to wire an aprilaire model 700 whole house humidifier to a Trane xe 90 (model:tux060c936c2) furnace. There are no acc terminals on the circuit board.there are two terminals marked hum. Do I need to add a 24vac transformer?the manuals for the furnace and the humidifier are... View more questions Search
Add your answer here.
|