Ask Experts Questions for FREE Help !
Ask
    alario's Avatar
    alario Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 19, 2011, 01:12 PM
    I have a white rodgers1F80-51 thermostat.
    I have removed the wires connected to are and C. Then removed the batteries and waited 2 minutes. Then replaced the wire and replaced with new batteries. The furnace will kick on but eventually stops about 4 degrees less than the desired temp. Any suggestions?
    rodri's Avatar
    rodri Posts: 48, Reputation: 8
    Junior Member
    		  
    #2

    Dec 19, 2011, 01:17 PM
    For how long does the unit runs? Its it working properly or its just the fan running
    alario's Avatar
    alario Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Dec 19, 2011, 01:26 PM
    About 5 minutes. The furnace is working fine. Definitely thermostat related
    rodri's Avatar
    rodri Posts: 48, Reputation: 8
    Junior Member
    		  
    #4

    Dec 19, 2011, 01:48 PM
    It's it a new Tstat or old? Did it just started doing that? Do you have the manual, if you do check to see if you can calibrate the temperature.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changed over from White Rodgers Thermostat to Honeywell thermostat [ 3 Answers ]

I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I have changed over to a Honeywell programmable thermostat model RTH7400. Did all the correct wiring as stated in the books but when set to cool, the heater kicks on instead of the central air conditioning. What...

Changing over from White Rogers Thermostat to Honeywell Thermostat [ 2 Answers ]

Changing over from a White Rogers Thermostat model 1F78-151, which is a single stage thermostat for heat only. What Honeywell Thermostat is compatible with this brand? Thanks, Ruth

Changing over from White Rodgers Thermostat to Honeywell thermostat [ 3 Answers ]

I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I want to change over to a Honeywell programmable thermostat model RTH7400. I need help in trying to figure out the wiring part of this whole thing. Can someone out there please help. I would certainly appreciate...

White rodgers thermostat black and white wires [ 1 Answers ]

We have a very old white roger thermostat for our gas furnace and are replacing it with a honeywell rth2310. Our current thermostat only has two wire one balck and the other white. Where do I make the connections.

Hooking up a new thermostat but old thermostat has a white and a black wire? [ 2 Answers ]

Everything I look at indicates a white and red wire for the connecting wires. Our thermostat is probably original to our home (1943). It has two wires. It is difficult to tell but it looks like one is a white wire and the other is black. I've tried looking on the internet for some info however...

View more questions Search