Ask Experts Questions for FREE Help !
Ask
    pilot75's Avatar
    pilot75 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 18, 2011, 04:00 PM
    Wairing diagram for legend wood burner?
    Wireing diagram for legand wood furnace
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #2

    Dec 18, 2011, 04:06 PM
    Hi pilot, what all are you trying to wire in? On/off? Thermostat? Blowers? It might help to give a model number also. Good luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wood Burner [ 4 Answers ]

I am in the process of installing an outdoor wood burner, Central Boiler, and hope that someone could give some advice on installing the thermostat. I currently have fuel oil forced air in my house. The thermostat controlling that furnace is a round honeywell. The wiring is a two wire (red and...

Older; :Jensen wood burner [ 2 Answers ]

I have an older Jensen wood burner. The closest that I can come to a model is PFS 80-86. It is a two blower unit but hasn't been run in 6 or 7 years. The electrical looks OK including a thermostat.s Does anyone have any owners manual or instructions that would apply? Or could tell me anything...

Jenson Add On Wood Burner [ 2 Answers ]

I have a Jensen 24A add on wood furnace that was in my house when I bought it. I need a new 72 c.f.m draft blower and a new control center and I can't seem to find a web site where I can buy parts for this furnace. Can anyone offer any suggestions? Thanks in advance.

Wood Burner Question [ 1 Answers ]

I have recently purchased a home with a wood burner add on to the regular forced air heat pump my question is do I need to keep the blower constantly running on the back of the wood burner to circulate the warm or let the blower on my heat pump run to circulate the warm air from the wood burner...

View more questions Search