 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Open pressure switch with inducer motor running
I have 3 flashes when the furnace shuts off inducer is still running.When it shuts down wait a few min and the furn. Comes back on again.Is this normal operation?I do have a drain opposite side of the inducer.Is that on the wrong side of the furnace.Concord 95.
|
||||
Check out some similar questions!
I have an intertherm propane furnace, new in 2006 we just turned propane back on for the year, and it won't light. The red light is blinking 2 times & indicates "pressure switch open with inducer on" however I have no idea what that means or how to troubleshoot to fix. It hums like always before it...
Hello all. I have a Gibson forced air furnace I've been having trouble with the last couple of days. At first, the unit would start up... Inducer comes on, about 20 sec later the ignition coil starts to glow, the gas would turn on and ignite and it would run for a short period. There is an amber...
Brand new ducane gas furnace has this error any suggestions?
I have a new goodman furnace, today furnace will not come on. Blinking light indicates pressure switch indicates open fault and motor to inducer assembly is warm
Im getting error light, pressure switch stuck open. I have a York Diamond 80. I have two units in my house, upstairs and downstairs. Im more worried about the downstairs unit. So I went to the upstairs unit and took the pressure switch and replaced with the downstairs unit. Worked for a...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
