Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Blower assembly vibration, Heil gas furnace
[ 1 Answers ]
Heil gas furnace model GDE075F16A3. The furnace just quit working. The fault was a broken lead on the secondary of the 115V to 24V transformer. With the furnace operating again, I noticed that the blower motor/fan assembly was vibrating. The wife and I removed the assembly for inspection. During...
Flame color on Burner Assembly?
[ 1 Answers ]
What's the proper color of flame supposed to be comiing out of the burner assembly. My color is yellowish orange.
1992 ruud model 90, burner assembly? Screen is burnt out.
[ 12 Answers ]
Are there any burner upgrades for this furnace? Ruud mod 90 ser#bu5707 m46921326. The screen is burnt off it and the tech says the part has been discontinued. Thanks for any help. Lou
Heil furnace burner igintes then goes out
[ 3 Answers ]
I have a Heil furnace model number NUGK075AG02 (75,000 btu's) and the burner ignites for about 15 seconds then goes out and the fan continues to run. What might be the problem? Deka
Heil furnace short cycling of burner
[ 1 Answers ]
My 1983 heil model NUGK075DG01, natural gas, forced air furnace is running but only heats the house to 67 degrees no matter how high I set the temp, the fan continuously runs (in auto on thermostat) and the burner will cycle for 3-4 min. then shut-off for 10 min.. I have powered down and back-on,... View more questions Search
|