Baso bg1600m intermittent pilot control?

rodster4843 Posts: 2, Reputation: 1

New Member

Dec 15, 2011, 05:02 PM

Baso bg1600m intermittent pilot control?

Wiring conversion for Johnson pilot control 7G75/RHA-1 to Honeywell, Baso or whatever.

wmproop Posts: 3,749, Reputation: 91

Ultra Member

Dec 15, 2011, 08:30 PM

I don`t see a question here

Add your answer here.

Check out some similar questions!

Intermittent pilot will not spark? [ 0 Answers ]

Hello! It got cold overnight in the northeast and I am having an issue. I have a 20 yr old honeywell S860D intermittent pilot. I have never had problems with it and have tried most of the troubleshooting basics. Number 1, I am not sure if there is gas flow from the gas valve. I smell it faintly,...

Replacing intermittent pilot control module [ 1 Answers ]

I have a 22 old Janitrol (goodman) furnace and my furnace guy, besides trying to sell me a new furnace, says the intermittent pilot control module need replaced as it sounds like it's not working properly (bouncing relay). My problem is he wants to charge an arm an a leg to replace it and I found...

S8610U Universal intermittent pilot gas ignition control. [ 2 Answers ]

I wire the module up correctly and have 24V to module but no spark or led fault lights. The exhaust fan starts up and ignition sequence starts but no spark. Suggestions or exsperience with this module. Thks Mike

Gas furnace has an intermittent pilot, pilot lights, furnace tries to start [ 3 Answers ]

Have a 25 plus year old furnace pilot will start when signal sent furnace tries to start makes noise as it tries over and over but will not start. Thanks

Intermittent Pilot Ignition Control Wiring Help? [ 2 Answers ]

I have an older Carrier gas furnace. The Intermittent Pilot Ignition Control is short cycling. I ordered a replacement one. However, with everything else now days, the newer one does not match the older one. The older one (p/n 50D49-401) has three brown wires, one red wire, one white wire, one...