Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing Thermostat to HUNTER MODEL 44260
[ 7 Answers ]
I am replacing my old termostats with a HUNTER MODEL 44260 Programmable Thermostat. The wires on my old thermostats are not labeled. Both my thermostats have 1 white wire, 1 yellow wire, 1 blue wire and 1 wire that is slightly off-white. Can anyone help me? I don't know which wire is which. ...
Hunter model 44260 thermostat
[ 5 Answers ]
I am replacing a white - rodgers thermostat with a hunter set & save thermostat model 44260. I have 6 wires from the white - rodgers to connect to the hunter model 44260. Does anyone know which wire goes where?
Honeywell t87r1475 wiring to a hunter 44260
[ 4 Answers ]
I have a blue green red orange yellow and white wire from the wall... to a hunter 44620 with the following wiring codes... G RC RH Y/O W/B Y1 Can anyone tell me which wires go to which terminals... there is also a red jumper wire on the new unit... should this be removed..
Hunter thermostat model 44260
[ 1 Answers ]
Do you have a way of matching the color of the wires to the thermostat? I have 5 wires coming out of the wall, Green, Red, Blue, White, and Yellow.
Replacing an old Honeywell Thermostat with a Hunter Model 44260 to a York Heat Pump
[ 0 Answers ]
I have an older Honeywell thermostat with wiring G(green) W(white) R(red) X(blue) B(black) O(orange) & Y(yellow). My new programmable thermostat Hunter 44260 has G R/C R/H Y/O W/B & Y1. Which wires go where on the new 44260 thermostat? The manual is not easy to understand. Thanks! D View more questions Search
|