Ask Experts Questions for FREE Help !
Ask
    tat1477's Avatar
    tat1477 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 12, 2011, 06:22 AM
    Oil furnace blower speed
    I just got a new Nordyne mobile home furnace and it has three speeds on the blower but even the lowest speed is to high. My question is do they make a switch of any kind that I can add to the power supply to lower the speed even more or do I need to look for a lower RPM motor. Any info you can give me is appreciated.

    Thanks
    Bob

Check out some similar questions!

Blower speed on a intertherm electric furnace [ 0 Answers ]

Question, I have a e2eb-010 electric furnace, intertherm brand. Its both a/c and electric heat. When the heat comes on the blower runs at a much slower speed. I recently installed a outdoor wood boiler and tied it in with my duct work.

Old GE furnace with 2-speed blower fan and A/C [ 4 Answers ]

I have old GE furnace (gas/central model 21LU105D2M1) with 2-speed blower fan (blue,red & white wires) Heating work good, low speed first & after warm up high speed. Problem is with A/C. Seems like its work always on low speed. On low speed air flow is to weak to cool down 2nd (top) floor. I...

Old GE furnace with 2-speed blower fan and A/C [ 0 Answers ]

I have old GE furnace (gas/central model 21LU105D2M1) with 2-speed blower fan (blue,red & white wires) Heating work good, low speed first & after warm up hi speed. Problem is with A/C. Seems like its work always on low speed. I try to take out red and blue wire from relay, and put blue wire...

Hange blower speed in kenmore furnace [ 1 Answers ]

Hange blower speed in kenmore furnace

Furnace blower speed [ 1 Answers ]

Ihave a Goodman furnace with a variable blower speeds. I need to make the blower run faster for the A/C and slower for heat. How do I change the blower speeds?

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.