 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Relay switch on furnace
My relay switch on my furnace will not work and this is a brand new relay switch it won't kick on or anything when it is hooked up I'm wondering if the wires are hooked up to the wrong thing because nothing happens the eye on it is also brand new do you know how the wires get hooked up like color to color wise and also how do you bleed the heater?
|
||||
Check out some similar questions!
Hello, I've searched online to locate a replacement fan motor relay switch for an old Fedders propane heating unit in my greenhouse. The replacement should be fairly easy to do, however the part I was needing ( RBM 84-20103-301A) was listed as obsolete and was replaced by (McQuay part #...
Have electric furnace with heat pump. Replaced thermostat and now the emergency heat will not work. Thought I might have hooked up wrong so I called maker of thermostat and talked with them. They said the wiring was correct. The heat pump works and the blower comes on when emergency heat is on but...
My electric bryant furnace will keep running when it reach it temp could my relay switch be bad
Looking for part number AZ2280-1C-24A(204) relay switch for intertherm central air unit.
After duct cleaning my furnace (heat and air) does not work anymore. The thermostat indicates the system is on. Furnace light is on but the fan is not turning. There is that switch that you press when you open the door to the furnace. I guess is a relay swtich. On when door is closed and off when...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
