Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Light from CFL bulbs doesn't seem as bright
[ 1 Answers ]
I've had 60 watt CFL bulbs in lamps for years but just yesterday put a 100 watt one next to a regular 75 watt one in 2 hanging fixtures in my kitchen. The 75 watt regular looks a lot brighter than the 100 watt (and yes I waited). I was never really convinced about the 60 watt ones either; they...
Changing from 300 watt light fixture to a 52" ceiling fan w/ 2 13w CFL bulbs
[ 7 Answers ]
As I understand it, I should be safe using the same wiring. However. The no. of wires, and their configuration when I removed the light fixture (5-60watt candelabra-based bulbs), has me seeking assistance. By the way. I did turn off the circuit breaker. There are three sets of wires coming...
CFL Blub and timer switch
[ 1 Answers ]
I have been using CFL bulbs in three outside lights that are on two different circuits and controlled by SPST light switches. I'm going to replace both switches in their respective circuits with timer switches, however, the timers do not support the CFL ballasts. According to the instructions, I...
CFL bulbs dying prematurely
[ 2 Answers ]
Hi, We are using CFL bulbs quite successfully throughout the rest of our house, except in the dining room where we have now had 3 die on us within the last 4 months. I believe regular bulbs were dying in the same light fixture too. We swapped the light fixture for the same model and have been...
Source for Hampton Bay Ceiling Fan CFL Light Bulbs
[ 1 Answers ]
I have a 3X3 year old Hampton Bay Ceilings with PLSS13W2700 sprial 4 pin connectors. I can't find replacements that fit into the housing that are 4 pin. Anybody know of a source? View more questions Search
|