Ask Experts Questions for FREE Help !
Ask
    hatemraddy's Avatar
    hatemraddy Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 6, 2011, 10:14 AM
    How to calculate fan motor power
    I have industrial fan with flow 437,500 m3 per hour
    The fan is direct coupled to induction motor
    What is the required power of this motor
    sinnadurai's Avatar
    sinnadurai Posts: 127, Reputation: 2
    Junior Member
    		  
    #2

    Dec 9, 2011, 07:50 AM
    If you employ several fans in parallel instead of a single fan you can save power. Considering the site conditions first estimate howmany fans could be accommodated.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to calculate motor power [ 0 Answers ]

I NEED TO DRIVE A DRUM OF 1700 MM DIAMETER AND 400 MM WIDTH SUPPORTED ON ROLLER BEARINGS. An Automobile tyre is pressed against it with a force of 150 kN. Speed of drum is 1150 rpm. Weight of drum is 1000 kg. What is the horsepower of the motor that can drive this load?

Ceiling fan has power at motor but fan does not rotate [ 1 Answers ]

Hampton Bay ceiling fan when checked has power at motor but fan does not rotate. The blade is free turning and is not binding.

Ducane Furnace - No power to fan motor [ 3 Answers ]

I have a Ducane DOLA84/95F4-AB Oil Furnace/air handler. The AC system is hooked into the same unit. The furnace fires up and makes heat with no problem. However the fan is not spinning. First I pulled the fan and bench tested it - ran it on each speed for a while under load and everything...

How to motor power calculate [ 1 Answers ]

How to motor power calculate when voltage, current in ampiar given

How to calculate motor power [ 2 Answers ]

Hi, I need to calculate the power of motor (KW) which require to rotate a drum which is about 7tons. This drum will be rotate by using 2 motors at both end. The diameter of the drum is 3M and the driven motor utilizing 0.5M tire. The drum should rotate at 5 RPM. This drum will be supported by 4...

View more questions Search