 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Goodman control board B18099-06 relay replacement
Has anyone had any luck replacing a relay on a Goodman B18099-06 board?
I have 2 units and both have the same board. One of the boards started failing last winter. Intermittently would cycle. Now the relay responsible for the first click to turn on the induced draft motor is not doing so; no click. New boards are $80 to $120. I have found the same relays for less than $3, so I'm thinking a little time and a soldering gun will save me 80 bucks... |
||||
|
||||
|
Board relays are not to be replaced. The manufacturer won't even do it. Any problems with boards require complete board replacement. I know, it sucks, but that's the way it is.
That being said, feel free to try soldering in a new relay, but know that you may create a safety issue. If the furnace decides to blow up, or burn down the house due to your efforts, that would be a shame for sure. I would suggest buying the new board. You will sleep much easier. Some things just aren't built to be repaired, (like I said, it sucks. Why in the heck don't they make the relays and simple components of the baord replaceable,, oh yeah, they wouldn't get rich that way, right?) |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a furnace with a B18099-13 control board. The status light says I have a gas problem or sensor. I have replaced the sensor and gas valve. It has ignited only a couple of times since I replaced them and the burner goes out then the lightstarts flashing again when the fan shuts off. Do I have...
Today I replaced the failing control board in my gas furnace with a new, universal one. Here is the info: Furnace: Trane XE 80 (model: American Standard, TDD060C936C1, back from 1996) Old control board: White-Rogers 50A50-471 Replacement: White-Rogers 50A55-843 After I installed the new...
I have brand new goodman furnace, AC part works fine, but when I turn it on heat the draft inducer motor never starts. I checked there is no power coming to it from the control board.
I am replacing a control board in a bryant 395cav heater the old one was missing, perhaps taken by the last resident, anyhow, I got a new ceso110057-02 fixed speed furnace control replacement kit but have no idea which wires connect to which spade plugs on the board, I hope someone can enlighten me...
View more questions Search
|
