Ask Experts Questions for FREE Help !
Ask
    rilayton's Avatar
    rilayton Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 3, 2011, 05:38 PM
    97 civic hx, no spark at plugs
    97 civic hx, no spark at plugs, has spark at coil, replaced dist cap,huh?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Dec 3, 2011, 06:14 PM
    Replace the rotor, since you already replaced the distrubutor cap. Ohm out the spark plug wires--replace, if necessary.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

97 prism no spark to spark plugs [ 6 Answers ]

1997 chevy prism. Getting fuel but has no spark to spark plugs. What is the most common problem

Spark plugs [ 1 Answers ]

I checked all plugs and wires on my 2000 dodge dakota... they are perfect,cap and button were fried so I replaced them. No improvement. When pulling a plug looking for spark, the truck started and ran with no applied gas, but when the plug was put back in, had to apply gas to get it to start.I...

Changing spark plugs on 93 civic ex [ 1 Answers ]

Ehhh yeah I did something stupid... I pulled out all the spark plugs at once to replace it with nkg plugs but now I don't know which one goes where... I heard if I don't put them in currently the car wouldn't start like it would be miss firing or something like that... Can someone please tell...

99 Civic with wrong spark plugs? [ 1 Answers ]

My Civic LX engine D16Y7 has 65K miles so it is time to replace the spark plugs. I looked up in the owner's manual and the NGK replacement part is ZFR5F-11. I bought the iridium ones ZFR5FIX-11. When I removed the old ones, to my surprise they were ZFR6F-11. Note that this car has only been...

Spark Plugs [ 2 Answers ]

I have a 1986 Oles with a V8 engine and 125,000 plus miles and the spark plugs have never been replace. My question is should I be concerned about them breaking off leaving the threads in the head? If so what can I do to prevent it?

View more questions Search