 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have an 80s era 8hp Snapper rear engine rider. The problem I'm having is that the mower bogs down terribly when attempting the cut even the most moderately thick grass. The engine seems to run just fine and the mower moves just fine. I was just wondering if there was a clutch of something for the...
Snapper Model 281123BVE 11 HP starts right up and idles good until the clutch/brake is released. Then is loses most of the power and barely spits and sputters. I have cleaned the carburetor, replaced the spark plug, fuel filter, air filter and cleaner. The seat switch, deck switch and rear...
I need to raise the mower deck of my Snapper rear engine rider. It has a single blade with 30-inch cutting width. Currently, when lever is in upper-most position (#6) the blade still scalps portions of my lawn. I have looked through some online manuals but they are a bit confusing. Help...
I have an 1989 snapper rear engine rider with an 8 hp briggs. The engine is I feel plenty strong and doesn't smoke or use oil (it's been in the garage unused for about 7-8 years up till a month ago) but gradually over the years it's lost it's speed. I thought it might have an internal clutch going...
The friction wheel and drive disk are fine. How do I determine what needs replaced in the differential?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
