Ask Experts Questions for FREE Help !
Ask
    IPMCRAW's Avatar
    IPMCRAW Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 26, 2011, 10:02 AM
    Rheem furnace
    I have a rheem furnace, the burner will come on run a few seconds, and then shut off, The LED Panel has a constant green light, and a blinking green light. The blinking one is in the middle the orange light never comes on. Can I fix this problem or do I need to call someone.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Nov 26, 2011, 10:35 PM
    Clean the flame senser.
    IPMCRAW's Avatar
    IPMCRAW Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Nov 27, 2011, 05:51 AM
    I got it working I put a volt meter on it just for the heck of it to make sure everything was working, and the polarity was wrong, so I switched the wires and it's working like new. I don't have a clue how that happened but it did..
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #4

    Nov 27, 2011, 02:56 PM
    Thanks for the update. Glad you got it going.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Rheem furnace [ 0 Answers ]

I have a rheem furnace. The problem I am having is the inducer motor comes on runs for about 30 seconds then the igniter comes on then the gas kicks in but only the burner beside the igniter lights up. If I tap on the gas valve all the burners come on, would this be the gas valve causing the...

OLD Rheem RGAA Furnace [ 2 Answers ]

When I turn on the AC and being on AUTO. For like 2 minutes its on for awhile then turns off. Its like that for 2 minutes. Then after the 2 minutes it stays on and won't stop. Any ideas what could be wrong with it. PLEASE HELP

Rheem furnace thermostat w [ 1 Answers ]

For the last couple of days we have had to manually flip the thermostat to click on. We usually have it set to 70 degress but the temp will not go above 68 before it shut off again; What could this be and can if be fixed inexpensively Jackie

Rheem 90 plus furnace [ 1 Answers ]

Installed in 2004. Just before the fan comes on the furnace bangs/clunks - sound like someone hitting pipes with a wrench. We have had trouble with ignition. Could this be related? If not, any answers?

Rheem furnace [ 1 Answers ]

My Rheem furnace is showing a diagnostic red flashing light, flashing 3 times. I cannot locate the manual on the furnace. Does anyone know what the 3 time flashing red light means?

View more questions Search