Ask Experts Questions for FREE Help !
Ask
    loj1962's Avatar
    loj1962 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 25, 2011, 10:05 AM
    My Coast spa is not maintaining the set temperature. Any suggestions
    Bought used tub, replaced heater, sensor and Pac. Temperature not being maintained.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Nov 25, 2011, 11:45 AM
    This requires some 240 vac testing, do you have the test leads and skill for that? What is the vac and amps for this tub and how are you supplying that power?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coast Spa Control - Resetting [ 6 Answers ]

Could you please advise where I may find out how to reset the control on my coast spa? The display is showing SER periodically, and it will not display the temp. We purchased this spa second hand however all elements of the spa work just fine. We did download the manual off the internet website,...

Indoor nground spa leaking. Suggestions to raise the spa without damage to flooring [ 1 Answers ]

I have an in-ground spa which weighs approximately 500 lbs. It is set indoors. It sits on concrete flooring and is built-up with concrete blocks. The only access to the spa in a 12" x 36" opening to access the pump area. There is no access to the pool anywhere else. There is a leak from one of...

New coast spa won't work [ 5 Answers ]

New spa arrived yesterday and the motor won't work. We tested everything and power is correct. The control panel comes on and spa tries to Prime but motor doesn't run, can hear the circuit board clicking when you press the jets button to prime. We released all suppected air locks but still nothing....

Furnace not maintaining set temperature [ 1 Answers ]

I have an electric Honeywell furnace. The last couple of days, the furnace has not been maintaining the temperature it is set at. It's at least 5 degrees cooler than what it is supposed to be. The external temperature is dropping by the day. Any ideas? I would really appreciate any help you can...

View more questions Search