Ask Experts Questions for FREE Help !
Ask
    kellyavery's Avatar
    kellyavery Posts: 4, Reputation: 1
    New Member
     
    #1

    Nov 22, 2011, 09:02 AM
    Where do I go for an old Sears wall heater part? 36C06 Type 101
    Anyone know where I can get the replacement part for a Sears wall heater? Part#6CO6 It's a wall heater that's about 5ft tall, mounted on the wall that vents out to a chimney. Yes I could get a new heater, but this old thing heats up a 800 sqft apt beautifully needing no electricity... strictly gas. One place wanted $1500 to replace it but all I need is that coupler thingie I think it's called... the part that ignites the pilot light.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Nov 22, 2011, 10:04 AM
    Are you talking about a thermocouple, little thing with a probe that stays heated by the pilot? If so it is a very common almost universal part found in most hardawre stores. Furnace Pilot Light (fix) replace $10 thermocouple - watch this on your iphone too! - YouTube Now just to be clear, a thermocouple does not light a pilot, a falme or spark ignitor does that but the thermocouple keeps the gas valve open as long as it senses heat. Its job is to close the gas valve completely if there is no pilot.
    kellyavery's Avatar
    kellyavery Posts: 4, Reputation: 1
    New Member
     
    #3

    Nov 22, 2011, 04:03 PM
    Well... it's this big piece that connects to the gas, connected to the themostat dial thingie and includes the pipe that leads to the pilot light. I called Sears with the only number I saw #36C06 Type 101, but they said serial #'s look like 000.000000. I'm still looking. Someone said that a Honeywell V800 gas valve would work on most instances, but I don't know if it's the same thing. BTW.. thanks so much for responding.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #4

    Nov 22, 2011, 05:17 PM
    Sounds a bit like you aren't real familiar with working on gas appliances. I'd suggest calling 3 other repair people for their estimate. Sears does have a fleet of repair people so maybe include them. Air Conditioning and Heating System Preventive Maintenance Services - SearsHomeServices.com
    kellyavery's Avatar
    kellyavery Posts: 4, Reputation: 1
    New Member
     
    #5

    Nov 23, 2011, 07:42 AM
    First... thanks for replying again.
    Second... No kidding. :-)
    Actually I'm researching this part for the plumber/electrician who will be doing the work. We can't seem to get a good serial number on the part. He has the terminology, I don't. THINGIE is my word of choice as you can see. I've called Sears, I've called the leading heating/cooling co. in town. One has no idea w/o the serial# and the second wanted to replace the whole thing which is unnecessary and too expensive. This piece connects to the pilot light. It's the piece that has the knob to turn the pilot on, connects to the thermostat sensor & connects to the gas line. It looks similar to my water heater unit. I wanted to see if the Honeywell V800 part would work if that's it.
    kellyavery's Avatar
    kellyavery Posts: 4, Reputation: 1
    New Member
     
    #6

    Nov 23, 2011, 07:44 AM
    First... thanks for replying again.
    Second... No kidding. :-)
    Actually I'm researching this part for the plumber/electrician who will be doing the work. We can't seem to get a good serial number on the part. He has the terminology, I don't. THINGIE is my word of choice as you can see. I've called Sears, I've called the leading heating/cooling co. in town. One has no idea w/o the serial# and the second wanted to replace the whole thing which is unnecessary and too expensive. This piece connects to the pilot light. It's the piece that has the knob to turn the pilot on, connects to the thermostat sensor & connects to the gas line. It looks similar to my water heater unit. I wanted to see if the Honeywell V800 part would work if that's it. I'll send a pict when he returns with the part.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #7

    Nov 23, 2011, 08:12 AM
    "the knob to turn the pilot on" that's the gas valve. What is wrong with it and how/who diagnosed this as the problem?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sears gas wall heater MODEL 867? [ 4 Answers ]

I need the operating instructions and repair or service manual for a Sears wall heater model number 867.734731 which was working well until it stopped and I cannot relight the pilot. This is a 21000 BTU max unit.

Hot Water Heater Problems? Check this site - HotWater 101 [ 10 Answers ]

If you are having problems with a newly installed water heater, review the Installation section or Troubleshooting Guides. Most problems with a new water heater are installation related and most are easy to resolve. Hot Water 101 Cheers, Tom

I have an old wall gas heater that is depositing a plume of gray on the wall above [ 1 Answers ]

This old wall gas heater, about 60's, is depositing a plume of gray on the wall and onto the ceiling above the unit. The service man has already told me that they is nothing that can be done about the soot/discoloration on the walls in the room. He assures me that the gas heater is working...

Insulating 'Sears' type house Floor/wall/attic [ 1 Answers ]

I am planning renovations for my house which I am told is a 1948 'Sears' type house 1.5 stories, original wood siding, now with metal siding. Thick plaster walls with no insulation. Attic has insulation up to the top of joist. Floors have no insulation. Floors are cold on feet. Duct work only...


View more questions Search