Ask Experts Questions for FREE Help !
Ask
    sturg1's Avatar
    sturg1 Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 19, 2011, 11:44 AM
    Armstrong furnace sx80
    The small circulator fan on the front of my furnace will not shut off
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
     
    #2

    Nov 20, 2011, 10:21 AM
    You have a stuck relay that will have to be replaced. Take a meter and trace it out. It's easy to fix. DrTom4444

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Armstrong ultra sx80 won't start after shuting off gas [ 2 Answers ]

I shut off my gas to my Armstrong ultra sx80 furnace now it won't light the thermostat is working with a jumper wire the fan works but seams like no gas is coming true help

Armstrong Ultra Sx80 A/C burns the transformer [ 2 Answers ]

Tried to run AC for the first time this season (Furnace works fine). After looking around, the transformer was definitely burnt. Bought a new one, swapped it out (after carefully re-connecting the proper wires), and the AC worked. About a day later, transformer burned out again. Bought a new...

Armstrong Ultra SX80 Heat Exchanger Failure [ 7 Answers ]

I recently experienced a series of small explosions while my furnace was operating. After extensive troubleshooting, I discovered the rollout switch was tripped, after I reset it, I watched the furnace startup properly, but as soon as the blower came on, it had extensive blowback tripping the...

Armstrong sx80 [ 5 Answers ]

I'm new to the sight, but am fairly handy around the house. I love doing my own repairs. My furnace would not light. The local tech that installed the furnace said he cleaned something, and the furnace has been lighting fine but the air coming out of the blower is much cooler. I had him back...


View more questions Search