Ask Experts Questions for FREE Help !
Ask
    missing48's Avatar
    missing48 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 19, 2011, 01:06 AM
    My system says I have 248 Mb of ram but I know I have 2 gb of ram?
    My system says I have 248 Mb of ram but I know I have 2 gb of ram? And I want to put windows 7 on my comp. But it won't let me. Someone please help me
    Curlyben's Avatar
    Curlyben Posts: 18,514, Reputation: 1860
    BossMan
    		  
    #2

    Nov 19, 2011, 01:07 AM
    If your system only shows as having 248 Mb RAM than that is all it can use.
    There is clearly a problem with your 2 GB, hence the reason you cannot install Win7.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

New RAM cards won't boot unless old RAM intalled also. RAM tested good. [ 3 Answers ]

Just purchased (2) 256MB RDRAM (Rambus) PC-800MHz-45nS type memory ECC cards (used). Dell Dimension 8100 rated for up to 2GB RAM, (4 RAM sockets) originally had (2) 64MB non-ECC + (2) 128MB ECC cards. Worked fine. If I install the (2) new 256 ECC cards in Bank 1, leaving Bank 2 empty, PC won't...

Is it possible add or change my 2.26 GHz, 248 MB of RAM to higher RAM? [ 5 Answers ]

I just need to know!

Can I use 1 gb ram along with 512 ram, or both should be same capacity. Because I amt [ 2 Answers ]

I was using 512mb ram along with 1 gb ram, and there was frewuent problem of blue screen of death, after removing 1gb and with 512 alone there is no problem. Then how can I upgrade my ram. Mine is lenovo thinkcentre with pentium d processor and 512 mb ram

Difference between PC100 RAM and PC2100 RAM [ 2 Answers ]

I was wondering what would happen if I put 512MB of DIMM PC2100 RAM in a Compaq laptop that calls for MB of DIMM PC100 RAM? I have the PC2100 RAM already and was wondering if it would be a big problem if the PC speed numbers didn't match up? Would the computer not run at all? It is real slow...

View more questions Search