 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Hello, I have an older 80s model Magic Chef furnace - G83-75D-5. The furnace worked fine all last winter. I put in a new air filter in prep of winterizing and now the unit will not come on. The paperwork says to be sure the door is replaced correctly due to the safety interlock switch... I have...
I have a older magic chef furnace and my father in law messed with the wiring now the pilot is lit but furnace won't ignite there are two wires from the gas valve both are black where do they go to
I have a Magic Chef LP gas furnace (Model EG6E100DC-1). Last week the heat wasn't kicking on in the morning and found that the draft inducer blower had cooked a bearing. I shut down power to the unit, removed the blower, sourced a new blower, installed exactly as I had removed it. The draft inducer...
I have an Ultra 97 gas fired heater made by Magic Chef. I assume its about 15-18 years old. When the heater kicks on, the only thing that happens is that the blower starts running but the ignitor does not ignite. There are 2 flat cylinder type switches when you open up the door. If you tap on...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
