Check out some similar questions!
Honeywell model # T8MPN100F14A1 forced (gas) air
[ 1 Answers ]
My furnace will not continue to work once the desired temp is reached. Normally when the temp drops below the programed temp the unit powers on and sends heat through out my home. Problem I'm having is you can hear the pilot ignitor clicking but it does not glow to light the pilot light,after a...
Goodman GDS8090 gas forced air furnace
[ 3 Answers ]
I have a question regard my goodman furnace on the "blink" (no pun intended). After discovering it to not be working properly I removed the front panel to find the blinking red light. It is blinking three times. I reviewed the troubleshooting guide to find 4 possibilities. I removed what I...
Heater gas forced air
[ 1 Answers ]
I have a combo heat and cooling system the problem is with the heat the unit cycles glow light comes on the furnace firers up and then shuts down I have to reset the system two maybe three times what causes this seem like every night I have to go through this what can it be
Problem gas forced air heater
[ 3 Answers ]
When I turn thermostat on it clicks, but no heat. My son turned just the fan on it works, he opened door to heater said the pilot light is ignited and first time the burners came on. They then went out and then wouldn't come back on.
3 yr old Goodman Gas Forced Air Furnace problems
[ 10 Answers ]
If thermostat is set to 70-90 degrees the furnace burner and blower will run constantly and the temp never gets above 68 degrees in the house. I have a Lux programmable thermostat and was thinking of replacing it with a Honeywell. I have a new filter. Any ideas? The weather has been in the... View more questions Search
Add your answer here.
|