Ask Experts Questions for FREE Help !
Ask
    cooper47's Avatar
    cooper47 Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 17, 2011, 07:10 PM
    Why do I have to jump thermostat for blower to start
    Why do I have to jump thermostat for blower to start
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Nov 18, 2011, 08:09 AM
    Jump, how so, what are you doing to get the blower to run?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My 1995 Honda Civic will not start. It will not jump start. [ 4 Answers ]

I can push it and it will start. The lights work. Autozone said the starter is fine. Please help TY.

MTD yard Machine won't start, why can't jump start [ 2 Answers ]

I have a 600 series yard machine and a couple of weeks back when I turned the key to start it, it acted like the battery was dead. I jumped it off from my car with no problem. I had planned to charge the battery but forgot. The next week when I went to mow the yard, again it acted like a dead...

Jump start a thermostat [ 1 Answers ]

Heloo. How do I "jump start" a home heating thermostat? Temporarily remove it from the circuit to find out if the boiler or thermostat is not working properly.(as suggested by HVAC1000-Thanks)

How to jump out are and W on thermostat? [ 4 Answers ]

Hello all - I appreciate any help you can give. I'm new at this stuff, so you might have to explain it without the technical talk, if it can be done! :p I have a Weil McLain gas furnace. I had an old Honeywell dial with mercury thermostat, which I switched out for a Honeywell digital. It has...

Tractor won't start with key - but I can jump starter to start [ 2 Answers ]

I bought a used Ford 1210 compact tractor and it will not start with the key. I replaced the switch and still no luck. Tested the safety switch & wire that goes to the starter and both are in good order (verified with ohm meter). When I try to start with the key, the lights dim some so I can see...


View more questions Search